A step-by-step walk-through of the new 22 IDEX v4 from delivery inspection to first power-up.
Receiving Your 22 IDEX V4 Industrial 3D Printer
When your 22 IDEX V4 arrives, the first step is a careful inspection of the shipping crate before unboxing. These industrial printers ship worldwide and most arrive without issue, but transit conditions can vary.
Look for visible signs of damage such as crushed corners, punctures, or dents in the box. Even if the exterior looks perfect, it’s still important to document the condition. Take photos or a short video of the packaging before opening it.
If you notice any damage, write “potential damage” on the bill of lading before signing for delivery. This simple step protects you if shipping claims are necessary later.
Check the Shipping Impact Indicators
Before removing any straps or packaging materials, inspect the monitoring indicators attached to the crate. These devices reveal whether the printer experienced abnormal movement during shipping.
- Tilt Watch Indicators – Detect if the printer tipped over during transit.
- Shock Watch Indicator – Detects heavy impacts or sudden drops.
If any of these indicators show activation, document the condition immediately with photos and contact support before proceeding with the unboxing process.
Removing Outer Packaging
Once everything checks out, remove the outer plastic wrap surrounding the crate. A utility knife works well for slicing along the edges so the plastic folds away easily.
After the plastic is removed, cut the shipping straps using wire cutters or shears. These straps can become trip hazards if left on the floor, so discard them right away.
At this point you will see the accessory kit box placed on top of the printer packaging.
What’s Included in the 22 IDEX V4 Accessory Tool Kit
The accessory box contains the tools and spare components needed for installation and ongoing operation. Inside you will find a comprehensive collection of items designed for both setup and maintenance.
- Nanopolymer build plate adhesive
- Touchscreen display assembly
- Custom torque wrench for nozzle installation
- High-temperature industrial grease
- Razor scraper for removing prints
- Tweezers for print handling
- Brass, steel, and nylon nozzle cleaning brushes
- Two spare hardened steel nozzles
- Wi-Fi antenna
- Power cable
- High-temperature gloves
- SD card reader
- Wire cutters and hex drivers
- Nozzle cleaning needles
- USB-A to USB-C cable
- Spare hotend fans and heaters
- RTD temperature probes
- Bi-metal heat breaks
- Door locking hardware
The machine also ships with both a carbon fiber build plate and glass build plates depending on the configuration.
Removing the 22 IDEX from the Shipping Crate
The shipping crate is designed for easy disassembly. The top lifts off and the four side panels slide out, revealing the printer inside protective foam packaging.
Important tip: do not discard the crate. Keeping the original packaging makes it much easier to ship the machine in the future for relocation, resale, or refurbishment.
The 22 IDEX V4 weighs roughly 175 pounds, so moving it safely requires at least two people. Lift from the front and back or from both sides while keeping your back straight and lifting with your legs.
Placing the Printer on a Stable Table
After placing the printer on a sturdy work surface, check that the machine sits firmly without rocking. Industrial printers do not require perfect leveling for print accuracy, but the frame should remain stable.
If the machine wobbles slightly, adjust the leveling feet underneath until the frame rests solidly on the table.
Removing Internal Transport Locks
Next, remove the protective film from the front glass and top door. Then open the enclosure to access the internal components.
Inside the printer you will find several red zip ties securing the print heads during shipping. Use wire cutters to carefully remove all four transport ties before operating the machine.
Installing the Touchscreen Display
The touchscreen control panel is installed using the included hex wrench. First remove the pre-installed mounting screws from the display bracket.
Align the screen with the mounting holes, insert the screws, and tighten them gently until secure. There is no need to overtighten.
Once mounted, route the screen cable underneath the machine and connect it to the five-pin connector located near the Ethernet port on the motherboard.
Connecting the Wi-Fi Antenna and Network
For standard machines, the external Wi-Fi antenna screws into the connector on the rear panel. Once installed, the antenna can face upward or in any direction for optimal signal strength.
Some regulated installations such as government facilities may disable Wi-Fi and rely solely on wired Ethernet connections.
Power Requirements and Electrical Setup
The printer includes a heavy-duty power cable designed for 20-amp electrical circuits. Running the machine on a 20-amp circuit is recommended to prevent breaker trips when operating at high temperatures.
While a 15-amp circuit may work under lighter conditions, adding additional equipment on the same circuit can overload it during demanding prints.
First Power-Up of the 22 IDEX V4
After connecting the power cable, plug the printer into the outlet and ensure the main power button is in the correct position.
The touchscreen will illuminate immediately because it receives power from the internal 5-volt supply, even when the machine itself is switched off.
When powered on, the printer will begin its startup sequence. You will hear the fans activate and the status lights will change colors as the system boots.
Once the interface loads, the printer will guide you through network configuration and system setup.
Next Steps: Preparing Your First 3D Print
With the hardware installation complete, the next stage is configuring your software environment. This typically includes:
- Connecting the printer to your network
- Installing the recommended slicing software
- Loading pre-configured material profiles
- Sending your first test print
Once these steps are completed, your 22 IDEX V4 will be ready to begin producing industrial-grade parts.
Final Thoughts
The 22 IDEX V4 is a powerful industrial 3D printing platform built for reliability and high-temperature materials. Following a careful unboxing and setup process ensures the machine starts its operational life in the best possible condition.